Track odnoplechny with hydraulic hammer drill mounted on a lightweight mobile cart
Attention: according to customer needs, you can still mount an additional diesel drive, solve the problem of the working body to move long distance.
The main purpose - to penetration in the coal mines, ore development, hydroelectric power, rail and road construction, as well as in the construction of tunnels, galleries. This machine uses a hydraulic drive with odnoplechnym oburivaniem, oburivaniya speed can reach up to 0.8-2 m / sec. The control system includes functions: automatic stop of the hammer to a final length, automatic protection against clamping probe and cleaning sludge water using Inductosyn. Easy operation, safe and reliable equipment. In this machine a small body, compact structure, the center of gravity at the bottom of the machine, non-straight, the method of crawler tracks, the work is stable, it can easily overcome the ups. Nonrectilinear hydraulic drill structure can lead drilling operation to produce face, ceiling, side of the system, floor.
This machine not only can dig and drill holes, according to the cross-section, after the installation of the patented "propeller", even more convenient, you can drill holes. The power plant is the only machine, power consumption is small, low noise, which helps to improve the working environment, improve the efficiency and quality of work is very suitable for the development of narrow and low generation.
Model |
DF10-1BD |
DF10A-1BD |
Drilling Speed (m/min) |
0.8-2 |
0.8-2 |
Length of Drill Rod (mm) |
2475 |
2475 |
Drilling Diameter (mm) |
27- 45 |
27- 45 |
Drilling Depth (one-time propulsion) (m) |
2.1 (Standard Configuration) |
2.1 (Standard Configuration) |
Applied Section (WХH) |
2 x 2 - 3.5 x 3.5 |
2 x 2 - 4 x 4 |
Travelling Speed (km/h) |
2.5 |
2.5 |
Gradeability (%) |
25 |
25 |
Quantity and Model of Drill Bit |
HYD200?1 |
HYD200?1 |
Dimensions (L×W×H) (m) |
6.5x0.9x1.5 |
7x0.9x1.5 |
Motor Power (kW) |
30 |
30 |
Weight (kg) |
6300 |
6500 |
Quantity and Model of Drill Boom |
ZB2.4 x 1 |
ZB2.9 x 1 |
Lifting/Lowering Angle (°) |
55/16 |
55/16 |
Angle of Ranging Arm Interior/Exterior (°) |
31/31 |
31/31 |
Compensation Stroke (m) |
1.5 |
1.5 |
Forward Rotation/Reverse Rotation (°) |
180/180 |
180/180 |
Quantity and Model of Propeller |
TJ2.1x1 |
TJ2.1x1 |
Pitch Angle (°) |
105/15 |
105/15 |
Swing Angle left/right (°) |
45/45 |
45/45 |